Selling POS Hardware into Australia and New Zealand
There is a question every Australian importer asks a factory and no factory can answer correctly: do you hold RCM? The mark is not issued to a manufacturer. It is affixed by a Responsible Supplier, and a Responsible Supplier has to be a company registered in Australia or New Zealand. What a factory can do is make that company's registration take a week instead of a quarter.

Why the RCM question does not have a yes
The Regulatory Compliance Mark is not a certificate and there is no body that issues one. It is a mark a supplier puts on equipment after two things have happened: the supplier has registered on the national database, and the supplier has declared that the equipment is electrically safe and meets the applicable standards. The mark records a declaration. It does not record a test result held by a factory.
That is why "we hold RCM" is not a sentence a Chinese manufacturer can say accurately. It can mean one of three things, and only one of them is useful: we have a test report that supports your declaration; we have a certificate of conformity for a Level 3 item; or our Australian customer registered and we are describing their registration as ours. The first two are worth money. The third is worth a follow-up question.
Who the Responsible Supplier is
The scheme is deliberately structured so that somebody inside the jurisdiction is answerable. The rules are explicit about who that can be, and the exclusions matter as much as the inclusions.
| Who it can be | What it takes | |
|---|---|---|
| Australia | A legal entity with an Australian Business Number | Registered on the EESS database, with an Authorized Officer who signs the declaration |
| New Zealand | A legal entity with an Inland Revenue Department number | Registered on the same database; New Zealand participates in the scheme |
| Overseas manufacturer | Nobody. An offshore company cannot register as a Responsible Supplier | The route is to sell through a local Responsible Supplier, or to become a local legal entity |
| Agent under the ACMA arrangements | A commercial agent cannot act as the Responsible Supplier | Agency agreements cover some ACMA obligations and not the EESS registration |
Two consequences follow, and both change how a quotation should be read. The first is that the declaration is not transferable: if the importer changes, the registration changes with them, and equipment already in the country does not become non-compliant but the paperwork for the next shipment does. The second is that the Australian entity carries the liability, which is why a distributor will ask harder questions about test evidence than about price.
EESS levels, and which part of a POS system is the risk item
In-scope electrical equipment is graded by risk, and the grade decides what has to be registered rather than merely kept on file. The grade is assigned by equipment type under AS/NZS 4417.2, so the first thing to establish is which grade each item falls into, before any sample is sent for testing.
| Level | Risk | What the scheme requires |
|---|---|---|
| Level 1 | Low | Registration is voluntary; evidence of compliance has to be kept and produced on request |
| Level 2 | Medium | Registration on the database is mandatory, and a compliance folder has to be maintained |
| Level 3 | High | Registration plus a certificate of conformity from a recognized certifier |
The trap here is that a POS system is not one item. It is a terminal, an external power supply, a printer, a drawer and often a scanner, and the external power supply is frequently graded higher than the terminal it feeds. A shipment can therefore contain one item that needs a certificate and four that do not, and the certificate is on the part nobody thought to mention in the quotation.
Confirm the grade with the certifier rather than with a supplier's summary, because the summary is usually written for the terminal and the certifier will be looking at the adapter.
The evidence pack your certifier will open
This is the list worth asking a factory for by name. Every line is something that can be prepared before an order exists, and every line that is missing is a delay once one does.
| Document | Standard it is tested to | Why it gets asked for |
|---|---|---|
| Safety test report | AS/NZS 62368.1, usually as a CB report with Australian and New Zealand national differences | It is the evidence behind the safety declaration |
| EMC test report | AS/NZS CISPR 32 | Covers the ACMA electromagnetic compatibility requirements |
| Radio test report | AS/NZS 4268 for short-range and wireless LAN equipment | Needed when the terminal has Wi-Fi or Bluetooth built in |
| Certificate of conformity | From a recognized certifier | Only for Level 3 items, which is often the power supply |
| Label artwork | RCM at the correct proportions, plus supplier name and contact | The mark has to be legible, durable and correctly scaled |
| Circuit diagram and critical components list | As tested | Lets the certifier check that the sample matches the file |
| User manual | In English | Part of the file and part of what a regulator may ask for |
Reports written to European standards are not a substitute. A CE report can be useful evidence and cannot be lodged as the Australian one, because the Australian limits and the national differences are not the European ones. Where a CB report already exists, the gap is narrower and the work is a supplement rather than a full test program.
240 V or 230 V? Both, and 3 volts past the adapter
Australia ran a 240 V standard from 1926, with a permitted variation of plus or minus six percent, which is 225.6 V to 254.4 V. In 2000 the national standard moved to the international figure of 230 V with plus ten percent to minus six percent, which is 216.2 V to 253 V. The change was not a renaming: the new band reaches 1.4 V lower at the top and 9.4 V lower at the bottom than the old one, and the two ranges do not coincide at either end.
People still say 240 V, and Western Australia still regulates a 240 V standard of its own, so the word is not going away. The number to design against is the band.
| Figure | Value | Where it comes from |
|---|---|---|
| Old standard, 1926 | 240 V plus or minus 6 percent, so 225.6 V to 254.4 V | AS 2926, formerly C1 |
| Current standard, 2000 | 230 V plus 10 percent minus 6 percent, so 216.2 V to 253 V | AS 60038 |
| Western Australia | 240 V standard still in force | State regulation |
| Published adapter input | 110 to 250 V | Our product datasheets |
| Gap at the top of the band | 3 V, or 1.2 percent of 250 V | 253 V minus 250 V |
The 3 V gap matters more in Australia than in most markets because Australian distribution networks run high. Rooftop solar on a suburban feeder pushes the voltage up during the middle of the day, and a site at the end of a long rural run sits high for the opposite reason. Neither is a fault, and both can put a socket in the top half of the permitted band.
If a site is one of those, put the measured voltage in the RFQ. A specification that says 110 to 250 V and a market that permits 253 V is a 3 V question, and it is better answered as a number before the order than discovered afterwards.
The plug: AS/NZS 3112 and the insulated pin
The Australian and New Zealand plug has three flat pins in a triangle with the earth pin longer than the other two, so that earth breaks last when a plug is pulled out. The standard 10 A version is what a POS terminal uses. There are 15 A and 20 A versions with wider pins, and they are not interchangeable with the 10 A socket, which is worth knowing before a kiosk with a large power draw is specified onto a retail socket.
Two failure modes account for most rejected shipments. The first is uninsulated live pins: the plug tops supplied into this market are required to have insulated pins, and a plug molded for another market will often have bare brass at the base where the fingers can reach it. It looks identical in a photograph and it will fail on sight.
The second is the Argentinian plug, which is the same shape with the polarity reversed and the pins about a millimeter longer. It looks close enough that a mixed pallet can contain both, and it is dangerous rather than merely non-compliant. Specify AS/NZS 3112 by standard number rather than by saying Australian plug, and check the sample.
One plug, two jurisdictions
Australia and New Zealand share the plug, the nominal voltage and the electrical equipment scheme, and they are not one market for tax or for enforcement. The tax rate is different, the tax invoice wording is different, and the regulator that turns up is different.
| Australia | New Zealand | |
|---|---|---|
| Tax on a hardware sale | GST 10 percent | GST 15 percent |
| What the document must be called | Tax invoice | Tax invoice |
| Number that has to appear | The supplier's ABN | The supplier's GST number |
| Additional requirement | Sales of 1,000 dollars or more must identify the buyer | Standard invoice detail applies |
Both countries quote retail prices inclusive of GST, which is a difference from the United Kingdom worth flagging to a software partner. A British till slip usually shows the tax as a separate line because the displayed price excludes it. An Australian or New Zealand slip shows a price that already includes the tax, and the software has to be told which convention it is printing.
What we can and cannot put in writing
| Claim | Our position | What we can send |
|---|---|---|
| We hold RCM | We will not write this; the mark belongs to the Responsible Supplier | Nothing, because the sentence is not available to a factory |
| We supply the evidence pack for your registration | Yes, and it is the part we control | Safety, EMC and radio reports, plus the certificate of conformity where the item is Level 3 |
| CE marking is enough for Australia | No; the standards and the national differences are not the same | A gap analysis against AS/NZS where a CB report exists |
| RCM is pre-printed on the label | Printed to your artwork, once your registration number exists | Label proof showing the RCM at the correct scale |
| AS/NZS 3112 plug with insulated pins | Standard on an Australian order | A sample plug for physical inspection before the run |
The wider position across markets, including the marks that are held by a local entity and the marks we can sign ourselves, is on the quality and certifications page.
Which models to quote
| Model | What it is | Why it fits an Australian site | What to confirm on the PO |
|---|---|---|---|
| SN-P20 | All-in-one POS terminal | One adapter on a 10 A socket, which is the whole requirement | AS/NZS 3112 plug with insulated pins, and the cord length |
| SN-A15 | 15.6 inch Android terminal | Small footprint for a counter that also carries a scale | Which wireless module is fitted, because that sets the radio report |
| SN-W50 | 15.6 inch terminal with the printer built in | One socket and about 300 cm2 less counter than a separate printer | GST-inclusive printing convention in the firmware |
| SN-POS8250 | 80 mm high-speed receipt printer | The standard counter printer, with the drawer on its trigger | Whether the drawer is driven from the printer or the terminal |
| SN-CD410 | Heavy-duty cash drawer | Passive part, driven by a 12 V pulse | That it accepts 12 V or 24 V, and the insert layout |
Printers are grouped under POS printers and terminals under all-in-one POS terminals. Service coverage and spare parts terms are the same in this market as everywhere else, and are set out on ordering terms.
Five lines for an AU/NZ RFQ
- Plug type I to AS/NZS 3112, 10 A, with insulated live pins, and the standard number written on the order.
- Which entity will be the Responsible Supplier, and whether it is already registered on the EESS database.
- The safety, EMC and radio reports as separate documents, so your certifier can lodge them without splitting a file.
- The measured supply voltage at the sites, and whether any of them have local generation.
- GST treatment and whether the software prints tax-inclusive prices, since the receipt convention differs from the UK.
The second line is the one that decides the schedule. Everything else can be prepared while a registration is being set up, and nothing can be lodged until the Responsible Supplier exists. The document side is covered in more depth by how to write a POS hardware RFQ.
Australia shares its 230 V nominal and its plus ten minus six percent band with the United Kingdom, and shares nothing else: a different plug, a different marking scheme, and a declaration that a factory cannot sign. Reading the two together is the fastest way to see which parts of a specification travel and which do not.
The same comparison, including the markets where the declaration can be signed by the factory, is on the market index.
Frequently asked questions
Can you supply RCM certification for Australia?
No, and no factory can. The RCM is affixed by a Responsible Supplier, which must be an Australian legal entity with an ABN or a New Zealand entity with an IRD number, registered on the EESS database. An overseas manufacturer cannot register. What we supply is the evidence pack behind the declaration: safety, EMC and radio reports, plus a certificate of conformity where the item is Level 3.
Is it 240 V or 230 V in Australia?
Both numbers are in use and they mean different things. The current standard since 2000 is 230 V with a permitted band of 216.2 V to 253 V, and the old 240 V standard with plus or minus six percent ran from 225.6 V to 254.4 V. Western Australia still regulates a 240 V standard. Design against the band rather than the nominal.
Do your plugs have insulated pins?
The plugs we fit for this market are AS/NZS 3112 with insulated live pins, because an uninsulated plug top fails inspection on sight regardless of what it is attached to. We will send a sample plug for physical inspection before a production run if you want to check it against your own socket outlets.
What is the difference between RCM and a certificate of conformity?
The RCM is a mark that records a supplier's declaration. A certificate of conformity is a document a recognized certifier issues for a Level 3 item, and it is one of the pieces of evidence that lets a supplier make that declaration. A system can need both, and often does, because the external power supply is graded higher than the terminal.
Does a CE report work for Australia?
Not as a lodgement, and it can still save time. The Australian limits and national differences are not the European ones, so a CE report cannot become the Australian report. Where a CB report exists with the Australian and New Zealand differences covered, the remaining work is a supplement rather than a full test program.
Do prices on the receipt include GST?
In Australia and New Zealand retail prices are displayed and printed inclusive of GST, which is the opposite of the usual British convention where the tax is a separate line. The printer prints what the software sends, so this is a software setting and one worth confirming before the first site goes live.